Modify Selection
- Hazard prevention and control:
- Ground control
- or
- Pressure arch design
- or
- Entry design
- or
- Scaling
- or
- Slope design
- or
- Highwall design
- or
- Pillar design
Home Links
Results 71 - 80 of 140
-
8/20/2013 - PC softwareThis installable toolbar provides quick access to seven NIOSH ground control software packages.
-
6/1/2011 - Technology NewsTo develop a portable field-use testing system for conducting ASTM-1550-05 round determinate panel tests.
-
1/1/2011 - Peer reviewed journal articlesIn recent years, the number of some annual ground fall fatalities has approached zero, indicating that significant progress has been made. However, more progress is needed to reduce injuries caused by rock falling between supports and by rib falls.
-
5/1/2010 - Peer reviewed journal articlesThis article describes experiments simulating rib scaling from an elevated bucket to examine force generation and electromyographic responses using two types of scaling bars at five target heights ranging from floor level to 176 cm.
-
1/1/2010 - Peer reviewed journal articlesUnderground stone mines in the United States use the room and pillar method of mining in relatively flat laying deposits. Roof and rib falls account for 15% of all lost time incidents. This paper presents the result of a study to improve pillar and roof...
-
7/1/2009 - Conference papersThis paper provides an overview of current deep cover pillar recovery practice.
-
2/1/2009 - Conference papersEach of the electronic versions of the MSHA fatality reports since 1995 was analyzed in detail, categorized by the type of the ground fall hazard. The remainder of the paper is devoted to evaluating each of the five largest categories.
-
11/1/2008 - Peer reviewed journal articlesThis paper provides an assessment of the performance of limestone pillars as observed at 98 different locations in 34 mines in the Eastern and Midwestern regions of the United States.
-
7/1/2008 - Conference papersThe centerpiece of this project is development of a Dynamic Failure Control Program to monitor evolution of dynamic failure hazards with changing geologic conditions to assure that control and protective measures are appropriately deployed.
-
7/1/2008 - Conference papersThis paper presents a pillar design methodology that was developed from a study of pillar performance in operating stone mines and concludes with guidelines for applying a developed equation and selecting appropriate input parameters.
Home Links
Content source: National Institute for Occupational Safety and Health, Mining Program